Rostock Effector Probe-less E3D J-head v5 mount
Description
Build For The Chinese Clone Of E3D V5 J-Head, With 30Mm Fan And Mechanical Endstop. No Probe Is Needed, J-Head Acts As A Probe. Inspired From Many Designs, For The J-Head Base I Can'T Find The Link At The Momment, For The Probeless Function This One (Http://Www.Thingiverse.Com/Thing:1093345) Buffalo Effector With Optical Z Probe Video When Probing Bed: Https://Www.Flickr.Com/Photos/Sub_Zer0/Shares/F6Esk2 Needs Some Work Cause It Is Has Some Weaknesses It'S A Beta Build. Thought In Probing Tests It Works Quite Well. Print Instructions: Free To Experiment, I Printed With .14 Layer Height @ 30%Infill Support Only Needed On Fan_Endstop Piece Assembly Instructions: 1) Place Both Pieces (Effector_Head Part) On The J-Head 2) Push It All Together From Unter The (Effector_Top Part) Putting One Side (Movable One) And Pushing After The Other (Stable One). It Is Firmly Tight Cause Of The Limited Space So This Will Bother You A Little, I Used A Knive To Make Edges A Little Smoother 3)1Xm3 Screw Through The Top+Head Pieces, 4) 2Xm3 Screws On The Head Piece (Tightens The J-Head) 5) Screw The Fan On The Fan_Endstop Piece And That On The Top Piece 6) Then Add The Endstop Adjusting It To Be Just A Click Away From The Smallest Movement On The Head Piece And Tighten It Up. Then Assembly The Whole Top Part With The Body On The Effector With Long M3 Screws Finally Place The Led Base Place Under The Effector And Tighten Up With Nuts.
Statistics
Likes
5
Downloads
0