MiniQuad 3.7
Description
I Want To Build A Little Quadcopter For Indoor And Outdoor Use. I Was Interesting By These Models: Mxq_105_Micro_Fpv_Quad For The Flight Controler Support Http://Www.Thingiverse.Com/Thing:1594735 And This One For The Frame And The Anti-Vibration Dampers Fireflo V3 Http://Www.Thingiverse.Com/Thing:1152714 So, I Decide To Draw My Design Combining What I Like In These Two Designs. It Fly Quite Good. Now I Have To Work My Driving. I Use Micro Scisky Flight Controler And 8.5 Brushed Motors And 750 Mah Battery. The Frame Is About 10-11G With Dampers. The Miniquad Total Weight Is 64.5G With Battery. I Probably Will Change For 500 Mah To Increase Flying Time And Decrease Weight. I Hope To Obtain About 60G. I Also Will Change Jst Plug On The Scisky For Walkera Plug. The Diagonal Dimension Is 110Mm. The Transmitter Is A Devo 7E Flash With Deviation 5.0 Compatible With Dsm2 Scisky Inboard Protocol. I Choose A Combo For Fpv: Fx797T For Cam And F408 For Receiver. I Put Model1.Ini For Devo 7E Transmitter And The Original Dump Profile For Cleanflight. Miniquad-3.7.1Up.Stl Is A Reinforce Version. I Also Change Propeller And Increase Flying Time (About 5Mn).
Statistics
Likes
40
Downloads
0