Maze Solver
Description
Https://Youtu.Be/Ddkci5Myxyi This Is A Current Working Project. It'S A 3D Printed Maze Solver And Line Follower Based On The Pololu 3Pi Robot. It Uses A Arduino Leonardo And A Custom Made Shield. Materials: * Arduino Leonardo * L293D * Piezo Buzzer * Qtr-1Rc Reflectance Sensor (2-Pack) X 2 (Https://Www.Pololu.Com/Product/2459) * Qtr-8A Reflectance Sensor Array (Only The Cutted 2 Sensor At The Left) Https://Www.Pololu.Com/Product/960 * 75:1 Micro Metal Gearmotor Hpcb 6V (Https://Www.Pololu.Com/Product/3064) * Pololu Wheel 42×19Mm Pair (Https://Www.Pololu.Com/Product/1090) * Pololu Micro Metal Gearmotor Bracket Pair (Https://Www.Pololu.Com/Product/989) * Pololu Ball Caster With 1/2″ Metal Ball (Https://Www.Pololu.Com/Product/953) * 2-Aa Batteries * 2-Aa Battery Holder (Https://Www.Pololu.Com/Product/1150) I Can Send The Arduino Code If Needed!! Good Printing And Best Regards!!
Statistics
Likes
26
Downloads
0