Black Magic Pocket cage / armor
Description
This Is A Cage/Armor For The Blackmagic Pocket Camera. Make Sure You Get Good Bed Adhesion Or Else The Edges Might Curl Up A Bit When Printed In Abs. I Recommend Kapton Tape + Hairspray. Print At About 85% Infill For Added Strength And Use Supports. Use A Vile + Sandpaper To Clean Up The Print Afterwards And Give It An Acetone Vapor Treatment For A Pro Look! Add The 3/8Th To 1/4Th Inch Screw Threads By Screwing Them In The Designated Holes. Its A Tight Fit And Might Take A While To Get Them All In, But That'S The Only Way They Are Firmly Secured In The Plastic. Features: -One Solid Piece For Added Strength -All 1/4 Inch Metal Mounting Screw Holes. -Cable Locking For Headphones / Mic And Hdmi Cable (It Locks The Cables, But Not The Plugs) -Removable Handle With 1/4 Inch Metal Mounting Screw Holes -Anti-Twist Feature When Mounting The Camera And When Mounting Tripod Plate Underneath -Works With Available Tripod Quick Release Plates. For Example The Manfrotto Mn501-Pl
Statistics
Likes
38
Downloads
0