Tevo Tarantula Direct E3D Titan X-Carriage
Description
This Is Direct Feed Titan Extruder X-Carriage Designed To Work The The Tevo Tarantula. This Was Designed To Work Specifically With An E3Dv6 Hotend, E3D Titan Extruder, And A Nema 17 Pancake Stepper Motor (Link Below To Dimensions And Specs) Features: - Extruder Direct Feed Setup Lowered To Clear The 2040 Tarantula X Rail - Currently Support Standard E3D Heatblock Bltouch, Sn04 (Stock) And Round Proximity Sensors - 3 Wheeled Design To Allow The Stepper Motor Drop To The Correct Height And Allows Easier Tensioning Of Wheels Against X Beam - Reinforcement Beams With Integrated Cable Tie Slots (Belt Lock Version) - 2 Versions: > X Belt Locking Mechanism (By Thingirob) - Eliminate The Use Of Zip Ties To Secure X Belt > X Belt Fine Adjustment Version (Modeled From Ulmenkott) - Provides Fine Adjustment Of X Belt Tension Important: Because The Endstop Was Relocated, You Will Need To Make A Few Changes In Your Firmware And Hardware. The Following Changes Were Done Using Marlin 1.1 Rc7 & Mks Base 1.2: 1. Uncomment Define Use_Xmax_Plug 2. Changed X_Home_Dir From -1 To 1 3. Moved The Connector On The Mks Board From -X To +X Additional: May Need This As Well. Thanks Xfirax For The Heads Up! #Define X_Max_Endstop_Inverting False // Set To True To Invert The Logic Of The Endstop X & Y Probe Offset(S): Bltouch: X Probe Offset From Nozzle: 20Mm Y Probe Offset From Nozzle: 65Mm Also Add (As Suggested By Elchangoguero) Define Nozzle_X +200 Sn04: X Probe Offset From Nozzle: 20Mm Y Probe Offset From Nozzle: 75Mm Round: X Probe Offset From Nozzle: 20Mm Y Probe Offset From Nozzle: 90Mm Note: I'Ve Included The Native 123D Design Formats So You Can Modify If Required / Desired. Keeping This Open Source To Hopefully Encourage Improvements And New Designs. In Development: - 8.5Mm Spacer For Volcano Heatblock - Integrated Layer Fan Mount & Fan To Eliminate The Need For The E3D Hotend Fan To Be Used As A Mounting Point Special Thanks: This Is A Remix Of Thingirob'S Tevo Tarantula Modular X Car Basic, E3D 2X (Http://Www.Thingiverse.Com/Thing:1438795) As Well As Using Ulmenkott Belt Tensioner Idea (Http://Www.Thingiverse.Com/Thing:1640682). Without Their Designs It Would Of Been Difficult To Create This Remix. Relavant Links: E3Dv6 Hotend - Http://E3D-Online.Com/E3D-V6 E3D Titan Extuder - Http://E3D-Online.Com/Titan-Extruder Nema 17 Pancake Motor - Http://Www.Omc-Stepperonline.Com/Nema-17-Bipolar-Step-Motor-35V-1A-13Ncm184Ozin-17Hs081004S-P-101.Html
Statistics
Likes
281
Downloads
0