Circuit Playground Yo-Yo
Description
Update: Adafruit Created A Version Of This Project That Doesn'T Need Hardware! Check It Out Here: Http://Www.Thingiverse.Com/Thing:1766385 Create A Programmable Yo-Yo Using Adafruit'S Circuit Playground And These 3D Printed Parts. The Assembly Is Snap/Press Fit. For The Full Instructions Check Out The Google Doc Linked Below. For Scaling/Dimensions - Scroll Through The Photos Above. All Dimensions Are In Inches. To Print This Project, You'Ll Need To Print Two Yo-Yo Body Parts Along With Two Snap Rings. You'Ll Assemble The Yo-Yo Using An M5 Nut, Spacer, And Hex Head Screw. If You Press The Nut And The Hex Head Screw Into The Plastic While It'S Still Warm, It'S A Lot Easier. Forgot And Let The Print Cool? No Problem, Just Use A Little More Muscle. Full Cad Via Onshape Here: Https://Cad.Onshape.Com/Documents/A10Dec4Ede7Ddb8Cb4Bf5B27/W/F8C0332F02Fca9A2D04Ad0E7/E/40577B039709625F2Ac633Fe Live Documentation (I'M Updating It 7/29/16) Here: Https://Docs.Google.Com/Document/D/1D5E25Yys03Jxvd4Htc4Jwkgdw4Xaqa6Shqgkyaiveoa/Edit?Usp=Sharing
Statistics
Likes
105
Downloads
0