HOTEND MOUNT for Airwolf HD2x... Convert to E3D v6 NO Volcano - THIS IS FOR THE NON VOLCANO VERSION
Description
This Is A Modification To Josh'S Original Which May Be Found Here With Complete Instructions On Assembly. Http://Www.Thingiverse.Com/Thing:956219 The Short And Sweet Of It: If You Want To Take Your Airwolf Hd2X And Print Out Something Greater Than 315C - Then You Need A Different Head Assembly. If You Want To Go Fast Get The E3Ds V6 Volcano And Use Josh'S Great Stl Files Found On The Link Above, Along With Complete Instructions. These Files In This Post Are If You Want To Print In Hi Fidelity And At High Temperature, And Also If You Want To Print With Carbon Containing Material, Then Get The E3Ds V6 From The Good Folks At Filastruder : Http://Www.Filastruder.Com/Products/All-Metal-E3D-V6-Hotend Be Sure That You Read All Of The Instructions On Josh'S Post And Note That My Bill Of Materials Is Similar To His, But With The Addition Of One Additional M3X45 Socket Head And M3 Hex Nut. I Wanted To Put A Leveling Post On My Version Of This, Like The Original.. We May Not Need It, But Why Not Put It In There? You Will Need: (2X) M3X20 Socket Head Cap Screw (3X) M3X45 Socket Head Cap Screw (5X) M3 Hex Nut (4X) Small Zip Ties (2X) E3D V6 + Hotness Like Josh Said, Proceed With Caution As You Will Need To Modify Your Software On This Deal! Http://Wiki.E3D-Online.Com/Wiki/E3D-V6_On_Airwolf_Hdx_/_Hd2X Http://Www.Soliforum.Com/Topic/12034/Upgrading-Your-Airwolf-Hdx-Hd2X-Hotend-To-E3D-V6-Volcano/ On8/20/16: If There Are Problems With Your Hot Ends Wiggling A Bit With The Original Design And You Don'T Want To Shim It, I Have Uploaded A Modified Front Piece Which Has Taken The Flats Down By 0.5Mm. Fixed The Problem.
Statistics
Likes
10
Downloads
0