Pyramid with base, angle 51.5, hollow
Description
Made With Freecad ####Update Note: There Are 2 Files Now. Added A Smaller Version (4.5X4.5Cm) With Same 1.3Mm Thick Walls So You Don'T End Up With Thin Walls When Downscaling The Original Larger Sized 14Cm Pyramid. Very Easy Print, No Raft Or Support Required, Filament-Saving Too. This Is The Simplest _Hollow_ Pyramid With A Face To Base Angle Of Ca. 51.5 Degrees. (Similar To The Great Pyramid'S Angle Found At Giza, Egypt.) It Has A 2Cm High Socket Or Base And Original Scale Of Pyramid Is 140X140X88 Mm With 1.3Mm Thick Walls Which Is Pretty Thin But Thick Enough To Print Easily Without Support. Main Use Is Decoration. With The Socket, Printed At Original Scale It Will Be 108Mm Tall. When Downscaling Use The Smaller Pyramid Which Can Be Found As The 4.5Cm Stl File So Walls Will Be Thicker. Although You Could Still Downscale The Larger One If You Want A Super Fast Print. There Is A Small Ventilation Hole In The Square Base And 2 Smaller Ventilation Holes Near The Top So It Might Deal Better With Sun Exposure And Humidity Resulting From Varying Air Temperatures. Align With Magnetic North For Best Time Machine Effect And Correct Levitation. :D J/K Used Glowing Pla Filament For Teh Lulz.
Statistics
Likes
6
Downloads
0