XYZ da Vinci filament cartridge spool replacement
Description
I Designed This To Be A Direct Replacement For The Xyz Da Vinci Filament Spools Inside Their Proprietary Cartridges. I Like To Feed My Printer From Cartridges I Refill Myself Because It Keeps Everything Neat And Contained And The Stock Cartridge Assembly Does A Pretty Good Job Of Preventing Intermittent Self-Unwinding And Tangling That Can Occur With A Simple Exterior Spool Arrangement. I Left 6 Square Cutouts Identical To The Stock Spools, So These Should Be Compatible With Your Own Filament Winding Apparatus If You Have One (Or If You'D Like To Use The Drill-Mounted One I Designed, Which I Will Upload Next). Printing My Own Extra Spools Lets Me Fill Them With New Filament While Prints Are Ongoing. I Also Melted Two Of My Original Spools Slightly By Letting The Oven Get About 15C Too Hot While Drying Some Filament. Oops. Printed At 100% Infill, Each Spool Requires About 110G Of Abs Filament. The Two Halves Are Different And Must Be Epoxied Together. They Are Designed To Be Self-Centering. I Epoxied Three Together Using Some Cheap Harbor Freight 2 Part Quick Curing Epoxy And Had No Problems. As Usual, Use This Design At Your Own Risk, I Am Not Responsible For Any Damages Or Injuries That May Result From Using These Parts.
Statistics
Likes
14
Downloads
0