Part Fan Mount / Rigidbot / Mk8 Dual Alloy Mount Kit
Description
This Is A 40Mm Part Fan Mount For A Rigidbot Using A Dual V6 Mk8 Alloy Mount Kit V1 Or V2. Two Mk8 Dual Mount Versions. The Newest V2 Mounting System Seems To Have A Slightly Different Base Plate Layout So The Original Did Not Line Up All The Mounting Screws Correctly. The Files Are Named Mk8V1 And Mk8V2 Accordingly. Two Bearing Mount Versions: One If You Are Using Stock Plastic Bearing Mounts, The Other Is If You Are Using The Stainless Linear Bearing Mounts. They Are Named Accordingly. Note: If You Print This At Not Too High Of An Infill, The Fan Mounting Posts Can Simply Be Snapped Off If You Prefer To Use Screws To Mount The Fan. Also, On One Of My Printers The Mount Seems To Be Lower On The Left Side By About 2Mm, So I Have Also Created A Slightly Angled Version For Those That Have The Same Issue. Otherwise, It Is A Simple Matter To Place A Couple Washers Under The Mounting Arms If You Need To Raise One Side Or The Other. Mine Rides About 2Mm Over The Models While Printing And Gives Excellent Cooling To The Parts, You May Need To Reduce Your Cooling Fan Speed If It Affects Your Hotend Temp.
Statistics
Likes
2
Downloads
0