EE Electrical Breadboard Cabinet Stackable Case - Parts - UPDATED Control Panel and Cabinet Wall Support
Description
I Have Seen An Assortment Of Breadboards, Blocks, Cases, Etc. I Have Not Yet Found Something That I Found Useful Enough To Be Comfortable With, Besides The Foldable Breadboard / Arduino Cases - Which I Also Designed & Printed My Own Versions Of. This Seemed To Fulfill The Needs That I Commonly Look For: - Mounted Breadboard - Control Panel For Mounting Parts - Spare Parts Case - The Drawers This Control Panel Is Setup For Mounting: - Leds - Switches - Potentiometers Assembly Requires The: Breadboardtrayfloor , 2 Drawers , 2 Stdctr Parts , 2 Stdside Parts , 1 Cntlpnl - And Gluegun Suggested. The 2 Stdside Parts Are Glued Under The Sides Of The Tray - As Side Legs. The Drawers Are Individually Temporarily Slid In To Adjust And Glue In The Stdctr Parts, In The Center Bottom Of The Tray - As Center Legs. The Cntlpnl Is Glued Onto The Rear Of The Tray. When Dry, The Drawers Can Then Be Slid Back In. For The Tentacle Probes , See: - 1711909 - Ee Electrical Tentacle Probes - For Ee And Arduino Cabinet Also These Are Stackable. To Stack Them, You Can Either Mount The Stacklegs On The Board Sides Individually, Or Buil A Cabinet To Slide The Tray-Drawer Boards In. To Create A Shelf, Mount The Multiple Stacklegs Vertically To Desired Height , Then Horizontally Via A Bottom Shelf With The Supportfloorwall Part And In The Rear With Another Supportfloorwall Part. Then Slide The Boards Into The Shelves. Hope This Is Useful !
Statistics
Likes
68
Downloads
0