"The Raza" G2S enclosure
Description
Well This Is A Huge Remix Of Http://Www.Thingiverse.Com/Thing:1381153, I'D Like So Much His Design, The Bigger Changes Are A Frontal Door And The Side Frames Windows, With My Setup The Base Aren'T Cover Well And The Print Head Bounch On The Original One So I Have Design A New Parts Than Add Some Sides Space; I Add Also A Vertical Hinge And Create A Front Door For This Reson The Original Parts Was Modified; Also I Add On All 3 Top Frames Holder A Structure For Servo, This Servo Will Park The Head When The Job Are Done. I Had Modify Also The Back Original Parts And Put Some Structures For Calbles And Filaments Holding. I Also Create New And Change Other Parts Form The Original Printer, The End Stop Holder, Mine Let Cables Run On Top. The Filaments Rolls Are Move From Top To Bottom Of The Printer And The Enter Point Of The Extruder Are Placed On Centrer Of The Machine, I Use The Same Extruders Holder Holes, Just Turn The Extruder 180 Degres And Make 2 New Holes For The Fast Tubes Connectors, I Had Create A Structure Than Keep The Tube Vertical For Then First 50 Cm Because Several Time I Had One Tube Than Was Smashed Ont The Z Carriage But I Had This Also When The Extruder Was In The Original Position. -New Vertical Fan -New Servo Holder (Cables Thougth The Top Of The Printer And Give Me More Screw For The Rgb Ligth Holder) -Top Rgb Ligth Bulb And Holder For Each One Axis, Design For Fit A 3W Star Rgb -Filaments Tubes Holder -Modify And New Parts From Http://Www.Thingiverse.Com/Thing:1381153 Edit 20/8/2016 Added All Objects For The Top Led And The Servo Parking Axis Structures Edit 25/8/2016 Modify The Rgb Led Structures, Servo Holders And Parking Edit 28/8/2016 Added Extractor 60X60 Fan Structures I Will Update This, It'S Just A Start Because There Are A Lot Of Stuffs To Put On And Not All Are Done Completly And Sorry For My English
Statistics
Likes
13
Downloads
0