Mount for Blaupunkt Motopilot 43
Description
I Bought A Motopilot For My Motorcycle, Whichs Uses Tomtom Maps And I Wanted To Use It In The Car As Well - But There Is No Car Mount From Blaupunkt For It! So I Looked In My Junk Box And Found This Swan Neck Mount With Suction Cup. Then I Designed A Bracket, That Just Clips On. There Is A Blank Version Too, If You Want To Remix It For A Ram Mount, Vent Mount Etc. For A Good Fit Glue A Bit Of Cloth On The Bottom On The Inside - I Used A Part Of The Soft Side Of A Hook-And-Pile Strip. Within The First Test I Realized, That The Sound Of The Motopilot Is To Low In A Louder Car. The Speaker Is On The Rear Side Of The Navi, So I Designed The Enhancement, That Reflects The Sound To The Front. In This Way It Amplifies The Spoken Words A Bit. You Can Print Each Part On Its Own And Then Glue Them. Or Print Both As One Piece. Then You Will Need Support. I Added Several Versions: Motopilot.Stl - The Bracket With A Slot For "My" Swan Neck / Suction Cup Motopilot_Blank.Stl - For Remixing (Air Vent Adapter, Ram Mount ...) Speaker.Stl - Sound Enhancement Motopilot_With_Speaker.Stl - The Bracket With A Slot For "My" Swan Neck / Suction Cup + Speaker As One Part Motopilot_Blank_With_Speaker.Stl - For Remixing + Speaker As One Part Motopilot5_With_Speaker.Fcstd - Freecad-File Importent: Use Abs Because It Can Get Very Hot Behind The Windshield Of A Car In Summer.
Statistics
Likes
3
Downloads
0