Belted Extruder V2. for 1.75mm Bowden
Description
<Strong>New Edition Now Available:</Strong> <A Href="Http://Www.Thingiverse.Com/Thing:1764551" Target="_Blank">Belted Extruder V.3 For 1.75</A> ---- This Is My Finished Belted Extruder (V2) For 1.75Mm Filament. <Ul><Li>I Have Worked Hard To Make It Wotk With Flexibles As Well. There Is Less Than 1Mm Room Between Idler And Filament-Outlet Hole When Filament Is Loaded.</Li> <Li>I Have Not Tested It With Flexible Though, As I Do Not Have Any 1.75 Flexibles On Hand.</Li> <Li>You Do Not Have To Open Idler To Load Filament, Which Makes It Very Easy To Change Filament!</Ul> <Strong>This Is Replacement Remix</Strong> Of My Previous <A Href="Http://Www.Thingiverse.Com/Thing:1477850" Target="_Blank">Universal Belted Extruder - Bowden And Direct</A>, Which I Will No Longer Work On. <Strong>You Can View It In 3D</Strong> On <A Href="Http://A360.Co/2Awgx6P" Target="_Blank"> Autodesk Fusion 360</A> Site. I Removed The Embedded Version Here As It Really Killed Some Phones And Tablets. ##Details## <Ul><Li>I Use A 60-Gt2 Aluminium Pulley To Avoid Inaccuracies And Avoid Wear And Tear Of Printed Gear. You Can Use A 80 Tooth Printed Gear If You Absolutely Want Higher Gearing Than 1:3.75</Li> <Li>I Use A 16-Gt2 Aluminium Pulley For My Small Gear.</Li> <Li>Gear Ratio: 1:3.75</Li> <Li>Silent Running Due To Belt Operation</Li> <Li>Belt Needed 168-172</Li> <Li>A Nema 17 Motor</Li> <Li>Belt Is Tightened By Tilting The Motor</Li> <Li>Strongly Advice You To Buy <A Href="Http://E3D-Online.Com/Extruders/Hobb-Goblin-8Mm-Shaft" Target="_Blank">Hobbed Bolt From E3D</A></Li> <Li>Push-Fitting Used Is 1/8 Bsp (9,7-9.9 Mm) Or M6. Look At File Names. The One Without Push-Fitting Size Specifications Is 1/8 Bsp.</Li> <Li>With 32 Microstepping And Normal 1.8 Degree Nema, The Steps Are About 1100Mm/S Filament, So Ultra High Definition And High Torque</Li> </Ul> <Strong>Updates</Strong> Added A Version For M6 Push-Fitting. I Have Made M6 Threadding For The Fittings. Tested Fine At 0.2Mm Layer Height.
Statistics
Likes
50
Downloads
0