Propsaver - model plane prop saver for 3mm shaft and m3 drive nut
Description
Prop Saver - Print Then Run A 3.5Mm Drill Bit Through The Hole (By Hand Usually) Fits On 3Mm Shaft With 1X M3 Nut Driven Into The Propsaver. Then Loop A Rubber Band (A O-Ring Works Well) Round The Prop And Prop Saver To Hold The Prop On, Hopefully Allowing The Prop To Come Off In A Crash Without Breaking The Driveshaft Or Prop.
Statistics
Likes
1
Downloads
0