Flashforge Creator Pro Super Duper Spool Hanger

Description

Edit: Sep-19-2016: Changed The Design To Metric. This Is A Super Duper Hanger For The Flashforge Creator Pro And Similar Printers. This Design Has A Few Advantage * Bearings Based, Virtually Zero Friction. * Easy To Mount And Remove The Spool. No Screwing Required. * Easy To Install And Remove Holder From The Printer (E.G. In Tight Places) * Fits All Common Spool Form Factor And Spool Holes, Including Hatchbox Spool With 1" Hole. Printing: Print In The Orientation Of The Provided Stl File. This Orientation Will Provide The Max Strength. I Printed With Abs, 4 Bottom/Side/Top Layers, 0.2Mm Layers With 0.4Mm Nozzle, 20% Infill And Support Material From The Printing Bed To That Large Round Bump. Materials: M6*90 Screw (E.G. Https://Www.Amazon.Com/Gp/Product/B0143Acxd4), 4 X 626 Bearings (I Prefer The Plastic/Glass Type, Search Ebay For '626 Plastic Nylon Pom Ball Bearings', They Turn Smoothly, Open Don'T Require Lubrication, Don'T Rust, And Light Weight), And An M6 Hex Nut. Assembly: Debar The Spacers And Other Holes (Use A Debarring Tool Such As Shaviv Or A Large Drill Bit) Insert The Bolt Into The Base, Inserts The Spacers And Bearings Insert The End Piece And The Nut And Tighten Everything. Verifying Your Assembly: * Make Sure That All The Bearings Turn Freely. The Spacers Are Designed With Chamfer At Their Ends To Make Sure The Touch Only The Center Part Of The Bearings. * Make Sure The End Piece Is Well Tighten And That It Is Pointing Up. If It Doesn'T Point Up, Release It, Release, Turn The Bolt In The Base A Third Of A Turn Or So And Tighten Again.

Statistics

Category

Tags