Lead screw tower addon
Description
This Is A Collection Of Parts That I Put Together To Allow The Easy Addition Of Extra Lead Screw Towers Onto V-Rail Extrusion Framed Corexy Printers. The Goal: Perfect Bed Movement Stability. Hardware (Items First, A Few Amazon Links After To Make It Easy): The Bottom Bracket And Stepper Dummy Require An M5X50 Sockethead Bolt To Serve As The Shaft, Each Of These Should Have A Gt2 Pully Attached Underneath A Flex Coupling. Each Are Attached To The V-Rail Extrusions Via M5X10 Socketheads Into M5 Square Nuts. The Bottom Bracket Spacer Is Attached Using Four M3X25 Socketheads And The Internals Require A Series Of 5X10X4 Mm Bearings (One On Top, And Three On The Bottom). The Belt Tensioner Requires A Gt2 Idler Pulley Set In Place With A M3X25 Sockethead Into A M3 Nylock Nut. The Tensioner Arm Is Held Into Place Atop The Spacer Using 2 M5X10 Socketheads, One From The Top, The Other From The Bottom. The Tensioner Base Should Be Attached To The V-Rail With M5X10 Socketheads Using M5 Washers To Prevent Deformation; Furthermore, The Assembly Should Be Anchored Using M5 Square Nuts Just Like The Parts Above. The Top Bracket Requires The Same Anchoring Hardware To The V-Rail Along With Four M3X10 Socketheads Anchored Into The Leadscrew Fitting. Note: The Top And Bottom Brackets Are The Same Part. Links: 400Mm 8Mm Lead Screw - Https://Www.Amazon.Com/Gp/Product/B017Ar5Qbs/Ref=Oh_Aui_Detailpage_O01_S00?Ie=Utf8&Psc=1 Flexible Couplings 5Mm To 8Mm - Https://Www.Amazon.Com/Gp/Product/B016Kfrr0O/Ref=Oh_Aui_Detailpage_O01_S00?Ie=Utf8&Psc=1 5X10X4 Mm Miniature Deep Groove Ball Bearing - Https://Www.Amazon.Com/Gp/Product/B00Zhstkce/Ref=Oh_Aui_Detailpage_O00_S00?Ie=Utf8&Psc=1 Gt2 Timing Belt Pulley 16 Teeth Bore 5Mm Width 6Mm - Https://Www.Amazon.Com/Gp/Product/B019Gi5Dvc/Ref=Oh_Aui_Detailpage_O04_S02?Ie=Utf8&Psc=1
Statistics
Likes
6
Downloads
0