Ops Core Helmet Goggle Attachments
Description
I Used The The Of Http://Www.Thingiverse.Com/Thing:734608 To Create A Goggle Attachment For My Ops Core Helmet, Arch Rail Mount. They Slide In On The Lower Back Part Of The Rail To Create A Bracket To Attach A Set Of Goggles To. They Are Not Pretty But They Are Functional. The Set Published Here Is The Final Set, The Set I Printed And Tested Had A Few Flaws (Too Long, And Some Overhangs). For This Set I Suggest Printing 15% Infill (Or More). The L And The R Fit Inside, So As To Not Be Visible, But To Aid The User To Slide Them Into The Correct Slot. Edges My Need Rounding With Sanding Paper - They May Be A Bit Sharp Post Print, Shaving Though Goggle Elastics. The Angle Of The Straps Is Set At Roughly Horizontal - So Just Move The Attachments Up Or Down Until Eye Height Is Met. Also, They Are At A Slight Angle Away From The Helmet, This Is To Accommodate For Headsets - Thus Allowing The Elastic Of The Goggle To Go On The Outside Of Any Headsets (I Dont Use A Flip Up Headset Attached To My Helmet, But Rather One That Fits Over My Head, Under The Helmet). Any Questions Please Feel Free To Ask
Statistics
Likes
28
Downloads
0