Ormerod z axis upgrade
Description
In The Pursuit Of A Better Alternative To The M5 Lead Screw I Saw That Acme Lead Screws Have Come Down In Price Due To Higher Demand. After Figuring Out How To Implement This Upgrade I Came Up With This Design. This Upgrade Requires Three Printed Parts And A Structural Modification Of Your Printer Which _Will_ Force You To Recalibrate Your Printer. --Please Note-- The Screws Holding The Ir Probe Will Come Loose Over Repeated Homing Of The X Axis If You Do Not Lower The X Axis Homing Speed From F2000 To F1000 Or Lower, The Probe Does Not Recognize The End Stop Quickly Enough To Avoid A Collision With The Z Axis Screw. Bill Of Materials: 437 4 M4X10Mm Cap 4 M4 T-Nut 469 3 M4X10Mm Cap 3 M3X12Mm Countersunk 425 2 M3 X 50 Cap 2 M3 X N/A Countersunk X End Stop 2 M2.5 X 6Mm
Statistics
Likes
9
Downloads
0