Radial Generator I
Description
####**Low Rpm Generator ** <Br /> <Br /> ####A Larger, Better Working Version Here: Http://Www.Thingiverse.Com/Thing:1766551 -------- <Br /> <Br /> <Br /> Created For Test Purposes, A Finished Version Is For My Wind Turbine Http://Www.Thingiverse.Com/Thing:1718731 This Version Has Three Phases With Serpentine Winding But Theoretically Other Types Of Windings Are Possible. I Used 4X4X15Mm Magnets, Because I Had Them Here. 40 Of These Magnets In A Halbach Array Arrangement. <Br /> First Measurements With 50 Windings (32 Awg Wire) On One Phase At About ~120 Rpms: 3.8 V Peak-Peak, After The Rectifier Not Enough For My Application… <Br /> <Br /> #####**What You Need** 40X..............Magnets 4X4X15Mm (Q-15-04-04-Mn From Supermagnete) 1X................M8 Screw Or Threaded Rod 2X................M8 Nut 2X................608 Bearing Ø22Xø8X7Mm (E.G. Inline Skates Bearings) 4-8X.............M4 Screw An Nut ~1 Meter......Wire Per Winding (I Use 32 Awg, From A Microwave Transformer) <Br /> #####**Print Settings** - 0.4Mm Nozzle, 0.15 Layer, 55Mm/S Speed, No Infill, No Support - I Use „Cura 15.04.06“ #####**Assembly Instruction** - See Pictures - You Can Glue M4 Nuts In The "Deckel 2X.Stl". But Make Sure That The Mounting Screws Are Not Too Long. <Br /> If You Have Any Questions Or Need Further Information, Feel Free To Contact Me. Gerne Auch Auf Deutsch :-)
Statistics
Likes
207
Downloads
0