8.5 mm Brushed Quad
Description
This Is A Quad Frame For 8.5Mm Brushed Motors And Has A Shelf For An Fpv Camera Housing. Two Versions: One With Wire Cutouts So You Don'T Have To Un Solder Your Flight Controller And Motors. And One Version With Tighter Motor Mounts So They Will Never Come Loose. I Have Only Tested The V3 Frame. V4 Is For When I Crash, But I Haven'T Broken V3 So Why Go To V4?! My Weight Is About 64G With A 720Mah 20C Battery. I Used The Crazepony 200Mw Fpv Camera. All Parts Are From Amazon: 8.5 Mm Hubsan Generic Motors Must Be H107D Or C Motors Not L (L Is 7Mm Motors) Syma 5C Version 5 Flight Control Board Crazepony 200Mw Fpv Camera 720Mah 20C Battery Flight Time Is About 5 Minutes Of Great Fpv. My Only Issue Is The Way The Syma Flight Board Controls The Throttle. 10% Throttle Rockets The Drone Upwards. 100% Same Thing. And Decrease From 100% Does Not Result In Descent. In A Large Field And Minimal Wind Its Fun To Fly. Something To Get You Into Fpv.
Statistics
Likes
10
Downloads
0