Lulzbot Taz Enclosure LCD + Raspberry Pi + Camera
Description
This Is A Modification Of The Lulzbot Taz Lcd + Raspberry Pi Case By Scuttlebot. This Version Allows For A Camera To Be Mounted (Raspberry Pi Camera Mount For 2020 Extrusions By Theoddartisan) On The Side, Adjustable With The Popcorn Joint - Simple Ball & Socket Joint For Pla By Wonderbot. It Has Been Successfully Tested With A Raspberry Pi 3 Running Octoprint (Https://Www.Youtube.Com/Watch?V=Mwsxo3Ksxm4). The Lid, Enclosure, And Camera Holder Were Reverse Engineered With Inventor (.Ipt) To Allow For Modifications. The Popcorn Joint Can Be Printed As Is, And Therefore No .Ipt Are Offered. The Enclosure Is Well Ventilated And Provides Sufficient Holes For Connections. It Is Longer Than The Original To Allow For Powering The Pi With Microusb. It Is Recommended That You Print With Supports (For The Ball Joint). Holes Can Be 'Self Tapped' With Regular Screws, But It Is Recommended To Coat Screw With Lubrication And Tap From Behind When Possible. The Lid Has The Colorado Flag On It (Pictured With White Out Highlighting This Feature, Because I Was Feeling Artsy). This Is Removable In The .Ipt. No Supports Required. The Camera Holder Was Modified To Match The Popcorn Joints. It Is Recommended That This Be Printed With Supports. The Cable That Comes With The Camera Can Be A Bit Short; Longer Flex Cables To Connect The Camera Can Be Handy And Are Inexpensive From Adafruit. All Parts Printed With Abs, With Normal Settings. Modeling And Printing May Be Purchased. See Optogenetic.Ucdenver.Edu For More Information.
Statistics
Likes
11
Downloads
0