Wanhao i3 FanDoor Scissor Edition
Description
<Strong>Update 2016-09-06:</Strong> Made Some Minor Changes And Added A Fan Guard/Grill Version... <Strong>What Is It:</Strong> This Is The Scissor Version Of The I3 Fan Door (Http://Www.Thingiverse.Com/Thing:1722827) Which Instead Opens Vertically. In Other Words It'S Practically A Door-Hinge For The Wanhao Duplicator I3 Feeder/Extruder Fan. It Will Fit Both 40Mm And 50Mm Fans With Variable Depths... And Should Also Clear The Stock Cooling Duct And 30Mm Fan Without Any Problems, I Hope. <Strong>You Will Need:</Strong> <Strong>2X (Optional) 3Mm Shorter Replacement Screws</Strong> For The Heatsink/Feeder/Steppermotor. The Holes In The Stepper Are Shallow So You Have To Find Suitable Screws And Perhaps Use Washers To Get The Length Just Right. But, I Wrote "Optional" On This Requirement Since I'Ve Also Created A Spacer For The Stock Plastic Plug Distancers, Which Builds An Additional 7Mm So You Should Be Able To Reuse The Long Original Screws For The Heatsink/Feeder/Steppermotor. This Will However Force You To Set The Fan A Bit Further From The Heatsink Than Optimal, But I Doubt This Makes Any Noticeable Difference In Cooling. Just Press The Original Plastic Plugs Into The Spacer And You Are Set To Go. Reason For Reusing The Original Plastic Plugs For This Spacer Is That They Tolerate More Heat Than Pla Does. <Strong>2 X 2.5Mm Screws</Strong> To Secure The Hinge To The Printer (You Will Also Need Two Nyloc Nuts If Not Using The Stock Fan Duct) <Strong>1 X Suitible 2.5Mm Or 4Mm Screw With A Nyloc Nut</Strong> To Screw The Two Printed Parts Together. Leave A Slight Gap So The Hinge Rotates Freely. <Strong>2X Suitable Screws</Strong> For The Fan Itself. But You Can Probably Use Small Cable-Ties Or Even A Piece Of String. Why Not...
Statistics
Likes
16
Downloads
0