Nissan Navara cable holder
Description
The Designers At Nissan Really Didn'T Think The Design Of The 12V Outlet In The Center Console Fully To The End Before They Released The Car. If You Connect The Phone Or Other Thing To The Outlet, There Is A Small Slot Where The Cables Are Supposed To Come Through. However, Every Ting You Open The Lid Of The Console, The Cables Are Free To Escape And You Have To Fiddle Them Back In Place When You Close The Console. But Ever Worse, Quite Often The Cables Manage To Escape The Slot Even When The Lid Is Closed, And When This Happens, They Get Stuck In The Locking Mechanism Of The Lid, Making An Really Unpleasant Sound When You Open The Lid - Sounds Kind Of Like Plastic Breaking (And It Probably Will At Some Point In Time). I Made The Holder To Hold The Cables In Place In The Designated Slot. I Have Tested With Two Usb Cables Each Being 3Mm In Diameter. I Have Mounted It With Double Sided Tape. The Holder Is Designed To Fit A Nissan Navara Np300 Form 2016, But Might Also Fit Others. The Rounding Is 10.8 Cm In Diameter, Which Slightly Smaller Than A Cd Or Dvd, Which Again Means If You Measure With A Cd Or Dvd You Should Have A Gab Of About 4 Mm.
Statistics
Likes
17
Downloads
0