Fatshark Lipo Case for NCR18650 mod
Description
From The Rotor Riot Video Instructional On How To Turn The Panasonic Ncr18650 3400Mah Batteries Into Fatshark Lipos With Battery Level Indicator, I Designed A Case To Go With It. It Is An Extremely Tight Fitting Design And I Recommend You Only Try This If You Are Great At Soldering. Not For Beginners, And I May Design A Simpler Version For Newbies In The Future If Enough Requests. What You Need: - 2X Panasonic Ncr18650B 3400Mah Batteries (Ebay, Amazon) - 2S Lipo Battery Voltage Display Indicator Board (Banggood, Ebay) - 2S Balance Plug (Ebay, Amazon) - 5.5 X 2.1Mm Dc Power Male Jack Right Angle (Ebay, Amazon) - Cyanoacrylic Glue Or 2-Parts Epoxy - Hotglue Tips: - You Do Not Need To Dremel The Ends Of The Battery To Get The Wires To Adhere, A Simple Metal File Or Sandpaper Will Do The Trick To Remove The Oxidation Layer For Solder To Wick. - Use Thin Wires For The Voltage Indicator Board As To Fit Inside The Casing - Inject A Bit Of Hot Glue Where The Power Lead And Balance Plug Exits To Keep It In Place From Being Tugged On.
Statistics
Likes
299
Downloads
0