Prusa i3 'Rework' EZStruder Mount
Description
This Mount Allows You To Mount An Ezstruder Direct Drive Extruder To Your Prusa I3 'Rework' X-Carriage. I Chose To Use A Direct Drive Extruder As I Was Having Some Issues Managing The Retraction Settings With The Wades Style Geared Extruder Leading To Excessive Stringing. (Disclaimer; I Also Changed The Filament Diameter From 3 To 1.75 And The Hotend Nozzle From 0.5 To 0.3Mm, So The Extruder May Not Have Been The Only Contributor To My Problem)
Statistics
Likes
36
Downloads
0