Filament Bin Holders
Description
I Started This Simple Little Project After Having Accumulated A Fair Amount Of Filament For My Printer. I Began To Realize That Between The Mound Of Filament Containing Boxes And Constant Switching Of Material And/Or Color Led To Problems In Several Ways, Not The Least Of Which Was Time Spent Switching, Dust Build-Up, And Moisture Concerns. My Solution Is As You See Here. This Thus Far Has Solved Said Aforementioned Issues And I Sincerely Hope It Can Do The Same For You. I Used Pvc Pipe For The Main Support Structure, Though It Does Not Work For Filament Spools With Smaller Diameter Holes And I Plan To Alter This Design For That In The Near Future. The Pvc Used Is An Outer Diameter Of 42.3Mm And An Inner Diameter Of 33.8Mm. 12-24 X 1" Machine Screws Were Used To Attach The Holders To The Sides Of The Bin. To Combat The Dust Issue, The Threaded Filament Dust Filter (Found Here - Http://Www.Thingiverse.Com/Thing:497764) Was Attached To The Bin As Seen In The Photo Via A 3/4" Hole Saw, And Desiccant Was Placed At The Bottom Of The Bin. Note - I Will Be Placing More Filters On The Outside Of My Bin For 3 To 4 Spools, I Just Haven'T Gotten Around To That Yet What With Life Getting In The Way.
Statistics
Likes
29
Downloads
0