Azteeg X5 Mini V3 40mm extrusion mount.
Description
This Is A Mount For An Azteeg X5 Mini For Openbuilds 40Mm Vslot Extrusion (2040 Or 4040). Use M5X10Mm Screws To Attach To Extrusion. Use M3 X 12Mm To Attach Board To Mount. (In The Photos, I Used Arduino Washers And M3 X 16Mm) 9/3/2016 - Rev 1.5 - I Adjusted Fitment Of The Ports. I Also Shrank It Down To 32Mm Total Height. To Achieve This, I Could Only Allow For 2 Mounting Screw Holes. I Also Added Nut Traps At The Bottom, With A .25 Mm Support Layer. 9/4/2016 - Rev 1.7 - I Added The Open Hardware Logo And Some Little 5X5Mm Extrusions For Zip Ties. 9/4/2016 - Rev 1.8 - I Added Some More 5X5Mm Extrusions For Zip Ties For The 3 Screw Terminals On The Left Side Of The Board. 8/6/2016 - This Is Pretty Much Complete For Now At Rev 1.8. I Added Some Photos. Ill Add More When I Am Done, To Show How I Intended This Thing To Be Wired Up.
Statistics
Likes
11
Downloads
0