Mobius 3 Axis Brushless Gimbal
Description
This Is A Three Axis Gimbal I Have Built Many Times Over The Last Few Years. It Is Simple To Put Together And For The Most Part Bullet-Proof. The Parts List Includes The Following: Prints Mobius_Gimbal_Mount_Plate_V03.Stl Mobius_Gimbal_Side_Plate_01.Stl Mobius_Gimbal_Roll_Arm_V01.Stl Mobius_Gimbal_Yaw_Arm_V01.Stl Yaw_Motor_Base_V02.Stl Motors 3X Rctimer Gbm2804 Hollow Shaft Gimbal Motors Hardware 12X M3 X 8Mm_Shcs 12X M3 Flat Washers 10X M3 X 6Mm_Fhps The Dimensions Of The Printed Parts Are Set To Accommodate A Mobius With A C2 Lens. The Motors Are A Bit Over-Sized Which Is Good If You Are Mounting On A Plane. The Motors Also Have A Hollow Shaft So That Wiring Can Be Neatly Routed. For A Controller I Would Recommend The Storm32 3-Axis Controller.
Statistics
Likes
46
Downloads
0