Radial Generator II
Description
This Thing Is Still A Work In Progress A Small Radial Generator <Br /> Designed For My Wind Turbine Http://Www.Thingiverse.Com/Thing:1718731 This Version Has Three Phases With Serpentine Winding. I Used 10X10X40Mm Magnets In A Halbach Array Arrangement. <Br /> First Measurements (After The Rectifier) 8 Windings (0,8Mm Wire) On One Phase At 400Rpm With A 500Ma Load: 5V I Had Only Wire For 8 Windings :-) And My Wind Turbine Does Not Rotate With 400 Rpm. ...There Are Still More Tests Needed... <Br /> #####___ #####Update #####15/09/2016: Update Parts: „Stator_1X.Stl“ And „Deckel_1X.Stl“ Easier To Print But Fully Compatible With Old Version #####___ <Br /> <Br /> #####**What You Need** 32X..............Magnets 10X10X40Mm (Q-40-10-10-N Supermagnete.De, Supermagnete.Ch) 1X................M8 Screw Or Threaded Rod 3X................M8 Nut 2X................608 Bearing Ø22Xø8X7Mm (E.G. Inline Skates Bearings) 4-8X.............M5 Screw An Nut 8X................M3X8Mm Screw / 3X8Mm Self Tapping Screw 1.3 Meter.....Wire Per Winding (I Use Ø0,8Mm, 20 Awg, From A Microwave Transformer) <Br /> #####**Print Settings** - Petg Filament - 0.4Mm Nozzle, 0.20 Layer, 50Mm/S Speed, No Infill, No Support - I Use „Cura 15.04.06“ - If You Print With Simplify3D Set The Extrusion Width Manual To 0,4Mm. <Br /> #####**Assembly Instruction** - See Pictures - Glue In M5 Nuts. Make Sure That The Mounting Screws Are Not Too Long. - You Can Cut M3 Threads Or Use Self-Tapping Screws For „Abdeckung Magnete 1X.Stl“ <Br /> If You Have Any Suggestions For Improvement, Questions Or Need Further Information, Feel Free To Contact Me. Gerne Auch Auf Deutsch :-)
Statistics
Likes
319
Downloads
0