Mobius Mini Mount
Description
*Update Oct. 4Th 2017*: Added Three New Variants Of The [Mobius Mini](Https://Www.Banggood.Com/Mobius-Mini-1080P-110-Degree-Wide-Angle-Super-Light-Fpv-Full-Hd-Camera-Dashcam-60Fps-H_264-Avc-P-1092165.Html?P=891405769235201409Hm) Mount For Different Quadcopters: - Qav X4 Rs, A 155Mm X Frame - Vx210-V2 - Beerotor X200 The New Mounts Enclose The Mini Fully To Prevent Flyaways After A Crash. The Mounts Are Designed To Hold The Camera Upsidedown So You Can Install The Brass Heatsink/Mounting Plate For Additional Cooling. In The [Msetup Config Tool](Http://Www.Mytempfiles.Info/Mobius/) You Can Configure To Flip The Image To Make Videos Appear Normal And Not Recorded In Australia. Contrary To The Original Mount The Newer Ones Are Supposed To Be Printed In Flexible Tpu-Like Materials Such As Ninjaflex. --- Old Text Below --- This Is A Simple Mounting Pod For A Mobius Mini. It Is Designed To Accept The Camera Upside Down To Give The Dsp Sufficient Cooling. In Msetup You Can Configure The Camera To Rotate The Image 180 Degrees. An Angled Version Of This Mount [Can Be Found Here](Https://Www.Thingiverse.Com/Thing:1845350). The Mount Is Designed In Openscad. It Has A Few Parameters To Allow You To Enable The Sd Card Cutout And The Usb Cable Cutout. If You Don'T Need Them Then You Can Set Them To False And Generate Your Own Stl File. It Currently Has No Titling Angle But That Is Something I Will Look Into In The Future. I Print This Thing In Ninjaflex At 90% Infill. This Gives A Very Strong Result And Has Some Additional Dampening Against Jello. Printing In Pla Or Abs Works Too... The Preview Of The Openscad File Looks A Bit Wonky, Not Sure What That Is, But It Is The Correct File.
Statistics
Likes
11
Downloads
0