Apple Picker
Description
I Created An Apple Picker Consisting Of A Long Wooden Stick With A Hinge At The End. The Gripping Jaws Are The Printed Parts. These Are Half Balls With A Mounting Lug That One Can Attach To The Stick Using The Preprinted Screw Holes. The Ball Has A Lot Of Holes In It To See Through And To Save Material. Look At The Pictures How The Mechanism Is Made. I Simply Pull A Rope At The Other Hand To Close The Jaws And Grasp My Apples. I Used A Stick That Measures 13X29Mm. For Your Convenience I Included The Scad-File In Which You Can Change The Measures (Within A Certain Range). Obviously You Need To Print This Part Twice. Note: The Apple Picker On The Photographs Is 1.2Mm Thick, But This Seems To Be A Little Too Optimistic. After A Few Buckets Of Apples The Thing Was Slightly Damaged. Therefore I Doubled The Thickness In The Stl And Scad-File Posted Here.
Statistics
Likes
53
Downloads
0