360 degree Pan Tilt system for FPV head trackers
Description
This Is A Pan & Tilt System For Fpv That Allows Full 360 Degree Panning And Is Compatible With Head Trackers I.E. Does Not Use A Constant Rotation Servo. The Centre Shaft Of The Pan Mechanism Is Hollow To Accept Wiring For The Tilt Servo Plus Camera Power / Video. Note That The Components Fit Together With Very Tight Tolerances And These Were Designed For My Up Box Printing Abs So Please Don'T Send Me Death Threats If You Print This And Things Don'T Fit Together From Your Own Printer, Unfortunately Things Have To Be Designed This Way To Completely Eliminate Play In The System. I Have Included Some Modified Plates That Fit The Multiplex Tucan Front Or Rear Bays, But The Mounting Points Are The Same As The Generic Plate Which People Can Either Use As-Is Or Modify To Accommodate Their Airframes. To Complete This You Will Need The Following Additional Parts: 1X Tgy 1800 180 Degree Servo From Hobbyking For The Pan. 1X Tgy 90S Servo From Hobbyking For The Tilt. 2X 8Mm Inner Diameter, 16Mm Outer Diameter, 5Mm Thick Bearings. 1X 3Mm Inner Diameter, 6Mm Outer Diameter 2.5Mm Thick Bearing With Flange. 2X M2 X 8Mm Bolts + Nuts. 1X M3 X 10Mm Bolt + Nut. 4X Servo Screws Stolen From Other Servos You Didn'T Use Them On, Additional To The Screws That Come With The Servos Above. Here'S A Video That Has A Couple Of Scenes Of The Mechanism In Action On My Multiplex Tucan: Https://Youtu.Be/Pvkasvax3Ks
Statistics
Likes
49
Downloads
0