Quick start script for FlashForge Creator Pro left extruder
Description
**Like? :-D** If This Thing Made Your Day Better, Please Click The Like Button Above. Thank You! Feel Free To Pm Me If You Have Any Feedback Or Questions. -Ck ============================================== **For Those Of Us Who Don'T Like To Wait!** _Please Ignore The .Stl File - It'S Just Workaround For Thingiverse Requiring A Model To Upload_ **Leveling:** Maximize Your Print Quality By Leveling First! I Use My 3 Square Print: Https://Www.Thingiverse.Com/Thing:1776032 **To Use:** - See Image Above - In Simplify3D, If You'Re Setup To Use The Left Extruder Only, Go To Your Process Menu -> Settings Tab - In The "Starting Script" Tab, Select All The Text Shown And Save It To A Backup Text File - Replace All That Text In The "Starting Script" Tab With The Text In My File - Done! **I Recommend** Preheating Your Bed And Extruder Using The Buttons And Menus On The Printer Before Starting Your Print. This Will Save You A Ridiculous Amount Of Time, Allowing Both To Heat At The Same Time, As Opposed To A Start-Up Script Which Heats One First Then The Other (As Is The Linear Nature Of Gcode). **Highlights:** - Left Extruder Only! - Runs Z-Homing At 50% Speed (50Mm/Min) For A More Accurate Level - Rapidly Moves To Front Of Bed @ 9000Mm/Min! - Fast Blob (Less Than 1S!) - Rapidly Moves To Start Position @ 3000 Mm/Min **Go Forth And Print Faster!**
Statistics
Likes
5
Downloads
0