Iron Man MK6 MK 6 Suit
Description
Update 07.01.2018: Uploaded Sketch For Back And Helmet. Here Are My Files For A Complete Iron Man Mk6 Suit. It Looks Great, But It Is Not Comfortable. And Because It Is Halloweentime I Added A Battledamaged Mask For The Helmet. Here Is A Video Of The Moving Faceplate. Special Thanks To "Redeathray" For Checking My Code And Helping Me. <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/Wdb1Uwu4Uay" Frameborder="0" Allowfullscreen></Iframe> <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/Zy1E9P6Gitu" Frameborder="0" Allowfullscreen></Iframe> <Iframe Width="560" Height="315" Src="Https://Www.Youtube.Com/Embed/P-Klnkn2Kaa" Frameborder="0" Allowfullscreen></Iframe> Https://Youtu.Be/Wdb1Uwu4Uay Https://Youtu.Be/P-Klnkn2Kaa Https://Youtu.Be/Zy1E9P6Gitu The Pictures Show Me Trying Out All Parts.The Electronics Are Not Yet Completed, But I Think You Are More Interrested In The Files. One Picture Shows A Small Version Of The Mk6 Helmet As Battledamaged. I Gonne Use It As Decoration For Halloween. I Prefere The Mk3 Helmet To Wear. I Like The Look More. You Can Download It From "Jhon De Sousa" On The Following Link: Http://Www.Thingiverse.Com/Thing:260152 Most Parts Are Founded On The Following 24Cm High Iron Man Mk6 Shell Figure From "Rohitven". I Asked Him To Rework And Publish His Files As A Costume And He Agreed To. Http://Www.Thingiverse.Com/Thing:1026995 The Gloves Are Made Of A Papakura File. The Glove Is Originaly Made By "Zabana" And Remixed By "Darkside501St". Below The Original Link For The Glove: Http://Www.Therpf.Com/Showthread.Php?T=139470&Highlight=Hand+Zabana As Arc Reactor I Used This Modell From "Thaurus": Http://Www.Thingiverse.Com/Thing:1377484 All Parts Were Made For A Prusa I3 With A 220X220X240Mm Buildplate. If You Have Any Problems Or Find Parts Which Are To Big Please Contact Me And I Will Do My Best To Change It. Except Of The Printed Parts, Some Buckles (Printed Or Bought), Elastic Strap And A Lot Of Soft Foam For A Little Comfort You Will Need The Following Parts: Helm: 4X M4 Bush, Mg995 Servo, Any Arduinoor Other Micro Controller, At Least 8X Led White, 4X M4X10, 4X M3X20, 4X M3 Nut, Acrylglass, 2X Contactor , (Or 1X, Depending On The Sketch You Use) Neck: Eva Foam For A Comfortable And Flexible Neck (If You Want To Make A Neck) Chest: Acrylglass 2X M4X40, 2X M4 Nut, Abs: Eva Foam For A Comfortable And Flexible Sideparts Lower Arm (Each): Some Springs For A Backflipping Handplate, M4X20, M4 Nut Gloves (Each): 4X Led White, 1X G4 Cob Led Spot, 1X Contactor (To Enable G4 Cob As Repulsor) Hips: M4X25, M4 Nut Thigh: If You Want The Knee Moving / Flapping You Will Need Four Springs. I Used A Blow-Dryer To Make It A Little More Comfortable, Because They Are Really To Narrow For My Legs. But I Could Not Resize Them, Because Then They Wont Fit To The Rest Of The Costume And It Won'T Look Good . Shoe: A Lot Of Foam To Make It Suitable. Clipmount: It Is Made To Attach The Elastc Strap. You Will Need A M4X25 And A M4 Nut For Each, You Can Connect The Different Parts By Using A Clips It Might Be That Some Parts To Not Fit To Your Body. Please Check It Bevor You Print All. I Am About 1.8 Meters High And I Have A Weight Of 80Kg. The Following Measures May Help You: Head: 58Cm Shoulders 53Cm (From Side To Side) Chest: 105Cm Waist: 90Cm Hips: 104Cm If You Got Any Questions Feel Free To Ask And Massage Me. I Hope You Enjoy It.
Statistics
Likes
13975
Downloads
0