Adjustable Belt Tensioner/Tightener and Belt Tie (Tevo Tarantula)

Description

*Update 11/5/18*: Added 1.5Mm Base To The Thick Version. *Update 11/4/18*: Added A Thick Version (+2Mm Thickness). *Update 3/11/17* : New Hole, Added Fillet. *Update 10/23/16* : Increased Thickness For Screw Holder And Legs. A Simple, Adjustable Belt Tensioner + A Belt Tie To Replace The Cable Tie. The Tensioner Requires An M3 Screw. The Screw Hole Is Tight-Fit And Should Provide More Than Enough Tension To Hold The Screw. Designed To Be Printed At 100% Scale. Use Higher Wall Line Count (Shells) & High Infill For Maximum Strength. The Calibration Cube In 3Rd Photo Was Printed @0.1Mm Layer Height With *Properly* Tensioned Belts And A Dual Z Mod Https://Www.Thingiverse.Com/Thing:2163949 Sketchup/Fusion360 File Is Attached In Case Adjustment Is Needed.

Statistics

Category

Tags