Printrbot LC Lead Screw Retrofit
Description
Finally Decided To Upgraded The 5/16" Threaded Rods To Lead Screws On My Printrbot Plus Lc. The Rods Are 4 Start 2 Mm Pitch With 8 Mm Lead. The Adapters Are Tapped And Secured To The Nut With An M3 X 6 Mm Screw. Update Firmware Default_Axis_Steps_Per_Unit To 400 For Z Axis. Or M92 Z400 At A Terminal And M500 To Save It To Eeprom.
Statistics
Likes
40
Downloads
0