Atomizer stand / holder for tanks with 510 connector
Description
Updates: 26.09.2016 Closed The Bottom Of The Middle Hole Of The Base With 1Mm Layer 26.09.2016 Added Writting To The Base 26.09.2016 Added A Base For Drip Tips 28.09.2016 Changed Design Of The Top Parts (Old Ones Did Not Fit One Near The Other Because Of The Overhang) Print And Connect/Combine Any Amount Of Bases You Need. Print The Top Part If You Want To Lock Down Your Atomizer, Cut Down The Posts To The Length That You Need. Use 3Mm Screws To Screw It On The Base. Could Also Be Used As A Transport Frame. (Do Not Overtighten The Screws, Very Small Force Is Needed). Top Piece Available For Different Atomizer Height (Measured Without 510 Connector And Without Drip Tip Connector) 50Mm 48Mm E.G. Eleaf Ijust 2 40Mm E.G. Aspire Cleito, Joyetech Cubis If You Need Other Heights Of The Top Piece, Send Me A Message With The Height.
Statistics
Likes
23
Downloads
0