Raspberry Pi camera module afocal telescope mount
Description
**Raspberry Pi Camera Module Mount For Afocal Astrophotography.** Design Goal For The Mount Was To Facilitate Fine Movement Of The Raspberry Pi Camera Along 5 Degrees Of Freedom In Front Of A Telescope Eyepiece: * Translations Along Both Axes Perpendicular To Viewing Direction, * Translations Along The Axis Of The Viewing Direction And * Rotations Around Both Axes Perpendicular To Viewing Direction. **Design Compatibility Notes** Mount Was Designed To Be Used With 1.25" Eyepieces, But Can Be Adapted To Other Diameters. Several Parts Were Designed To Fit Bolts And Nuts Available At My Locale. Appropriate Holes Should Be Adjusted Accordingly For Use With Bolts And Nuts Of Other Dimensions Prior To Printing. Blender File Is Included Amongst The Downloads For That Purpose. Affected Parts Are: * *Fastener-Mandibula*, Where Holes Were Made To Fit M5 Nuts, * *Fastener-Railing*, Where Ducts Were Made To Fit M5 Nuts, * *Adjuster-Casing-Front*, Where Sockets Were Made To Fit M5 Nuts, * *Camera-Sitting-Back*, Where Holes Were Made To Fit M3 Nuts And * *Bolt Knobs*, That Were Designed To Fit Bolts With Flat, Slotted Heads.
Statistics
Likes
9
Downloads
0