PS4 control pad and headset mount. (can be attached with screws or zip ties)

Description

First Off Let Me Say That Any Donations For This Design Are Greatly Appreciated, Thank You Very Much In Advance! This Item Is A Mount For The Playstation 4 Control Pad And A Headset. I Have Designed The Mount So That You Can Either Screw It To A Wall Or Alternatively There Is Two Hollows In The Back Of The Mount Which You Can Thread A Zip Tie (Tie Wrap) Through To Fix It To Unusual Backings. If You Look Through The Pictures Of The Mount You Will See An Example Of An Unusual Backing That I Have Attached It To, It Is The Post Of My Computer Desk But It Works An Absolute Treat. The Beauty With The Playstation 4 Controller Holder Is That It Sits Around The Sticks Of Your Analogue Sticks Perfectly So It Is Able To Hold On To Your Control Pad Really Well And Any Daily Bumps It May Get It Should Hold Up Against Them And Keep Hold Of Your Control Pad Really Well. The Attached Files Are As Follows: Ps4_Controller_And_Headset_Mount.123Dx - This Is The Saved File From 123D Design. Playstation_4_Headset_And_Controller_Mount.Stl - This Is The 3D Model File Produced By 123D Design, You Can Open This With Any Slicing Program To Create Your Own Sliced Files. Ps4 Headset And Controller Print Gcode.Gcode - This Is Your Actual Printing File, I Have Modified The Supports Using Simplify3D Which Are In The Holes For Your Tie Wraps. This Is The Exact Gcode I Have Used To Print My Headset And Control Pad Holder Which Has Come Out Perfectly! The Settings I Used To Print My Headset And Control Pad Mount Are As Follows: Layer Height - 0.25 Mm First Layer Height -0.32 Infill Percentage - 15% Infill Pattern - Fast Honeycomb Support Material Overhang Threshold - 50 Degrees. Support Material Pattern - Pillars Extruder Temperature - 195 Degrees (I Have Used Pla So Modify These Settings If Using Abs Or Another Material.) Bed Temperature - 0 Degrees (I Have Used Pla So Modify These Settings If Using Abs Or Another Material.) The Slicing Program I Used Was Simplify3D It May Be Slightly Expensive But I Absolutely Swear By It, The Support Material It Puts On Comes Off So Easily. What Would Take Me Half An Hour To Clean Up Now Takes Me Literally Seconds, If You Have A Little Bit Of Spare Cash Available I Couldn'T Recommend It Enough! If You Have Absolutely Any Questions Please Feel Free To Message Me And I Will Get Back To You As Soon As Possible! Happy Printing!

Statistics

Category

Tags