Galaxy Trucker Boxes Redux
Description
Not Based On The Actual Source, But My First Attempt At Using Openscad. After Printing The Excellent Boxes Provided By Makkuro, I Found That They Were For A Bigger Game Box Than I Had. Mine Only Had 40Mm Of Clearance After Placing The Gameboards Inside. I'Ve Tested Everything Except The Divided Box, Because My Printer Isn'T Big Enough To Print The Default Settings (5 Chip Holders Wide, Holding 13 Chips Each). Instead You'Ll See The Settings I Use (4 Chip Holders Wide, Holding 22.5 Chips Each). These Have Been Included For Your Convenience, Or You Can Use The Customizer And Have Fun. (That Is Also The Chip Holder Shown In The Splash Folder). This Customizer Creates 5 Organizers. A Goods Organizer (Four Areas) And Lid. Another Goods Holder With Bumps (So It'S Easier To Get The Square Cubes Out). These Two Together Will Be 40Mm High. A Chip Holder And Lid (Holds 13 Chips In Each, But Has More Total Holders Than The Original By Default). A Chip Holder Sized Box And Lid With 5 Areas (This Is Sized To Sit On Top The Holder So It Stacks To The 40Mm Height). (Though As Noted, The Attached Stl Are For My Smaller Printer). Most Of These Parameters Are Customizable, Please Have Fun And Provide Suggestions And Feedback. Will Update With More Photos Of The Other Boxes Soon.
Statistics
Likes
23
Downloads
0