SC8UU Linear Bearing With Flex Element For M4
Description
I'Ve Reduced The Mounting Hole Diameter To 3.2Mm, So It Is Tight Enouph For Threading To Work With The Stock M4 Screws. I'M Using One As Lower Bearing On My Anet A8 B X-Axis And It Works Like A Charme! Story Behind: The Y-Axis Of The Anet A8 Has Only 3 Bearing, That Works But Imo 4 Bearings Are A Lot Better, So I Needed At Least One More Bearing. However, The Ball Bearings Are Working Better On Y-Axis Cause They Are More Tolerant, So I Used One From The X-Axis For That. First I'Ve Tested A Printable Sc8 Bearing Without Flex Ellements, But It Didn'T Work Cause It Wasn'T Tolerant For Anything And What Worked In The Middle Got Stuck In "Home" Position. Maybe These One Piece Bearings Will Work On A Perfect High End Machine Where Is Everything Perfect Straight, Parallel And Stiff, But Our Cheap Printers Aren'T That Perfect. So I Was Searching For Another Solution And Found Http://Www.Thingiverse.Com/Thing:1055756 With It'S Flex Elements, Imo It Could Work, So Why Not Give It A Try And I Was Right And It Works Like A Charme.
Statistics
Likes
77
Downloads
0