Raspberry Pi 2 model B / 1 B+ snap-together case
Description
This Is A Subtle Remix Of The Modular Raspberry Pi 2 Model B / 1 Model B+ Case By Aurelius. The Only Difference Is That The Tabs Have Little Snap Mounts In Them, Which Makes The Top And Base Snap Together Nicely So The Case Won'T Come Apart Easily. I Also Added A Variation On The Plain Top Part That Has Holes At The Sides, For Those Concerned About Ventilation. And To Make It Slightly Easier To Pull Out The Microsd Card, There Is An Alternative Base Model (V2) That Has A Slight Recess Around The Sd Card Slot. In Case You Would Want To Adapt One Of The Other Remixes Of This Case To Have The Same Tabs: **For The Top Part:** Create Four Spheres And Scale Them To X,Y,Z Dimensions Of Respectively (1.0, 1.6, 1.6) Mm. Taking Raspberrysnapcase_Base.Stl As Reference, Position The Spheres At (±28.5, -39.0, 11.5) Mm And (±28.5, 41.47, 11.5) Mm, And Join Them As Such With The The Lid When It Is Aligned To Fit The Base. **For The Bottom Part** Create Four Spheres At The Same Locations As Above, But Scale Them To A Size Of (1.2, 1.92, 1.92) Mm, Then Subtract Them From The Base. The Lid In The Photo Was Custom Made With Our Company Logo And Is Not Available :)
Statistics
Likes
14
Downloads
0