RB1 and RBB Back Plate upgrade system
Description
This Is The Next Iteration Of The Back Plate Upgrade System For Rigidbots Both Regular 10X10 And Big 12X16 (Rb1'S And Rbb'S). These Back Plates Provide A Common System For Mounting The New Upgraded Power Supply And Main Board Inside Of The Printer On Both The Regular And The Big. There Are Three Stl Files. The Power Side. The Board Side, And The Middle. The Power Supply And Main Board Sides Work On Either Size Of Printer. The Middle Section Is Required Only For The Big. There Is A Two Part Design That Does Not Require A Cable Extension For Power Supply On The Big That Can Be Found Here: Https://Www.Thingiverse.Com/Thing:2301410 Use The Tall Riser Part For Use With The New Locking Cable Lcd On A Big Printer So That The Cable Can Still Reach Without The Adapter. Designed To Be Printed On A 10 X 10 Bed So That A Regular Printer Can Print Its Own Upgrade. A Big Can Fit All Three Parts At Once. The Files Are Cura Scaled And Oriented For Printing. The Rest Of The Kit Parts Can Still Be Found With The Files These Were Remixed From With Additional Pictures And Instructions. Http://Www.Thingiverse.Com/Thing:1712645 Note The Print And Post Print Instructions Below.
Statistics
Likes
5
Downloads
0