(7 module/52V )Nissan Leaf Module DIY Battery Pack Cover and Cable Management

Description

***Update: Recommend Downloading "Leaf_Biscuit_Small" As The Most Up To Date, Most Compact Version For Printing. Best Joinery Technique. This Variant Uses #8-32 Screws, However. Remix Of 5 Module Cover. Added Variant Of Cable Exit So People Can Have The Low Current "Sense" Wires Coming Out One Exit And Each Of The (+) And (-) Leads Coming Out Their Own Exit. Made A Split Body Variant To Print In Two Pieces Since The One Piece Build Is Gigantic. Bolt Holes Are Designed For Either #10-32 Or M6 Screws, Or Rather, The Hex Voids On The Back Side Should Fit 3/8" Or 10Mm Wide Nuts, Which Are The Most Common Width Nuts For #10 And M6 Screws. You Will Have To Drill The Holes Out A Tiny Bit To Fit M6 Screws Through.

Statistics

Category

Tags