Microfluidic Test Chip Mold

Description

I Printed This On The B9Creator, On The 50µm Pixel Setup And Sliced 25,4µm Thick. It Produces Channels Ranging From 1,0Mm To 0,05Mm Width And 0,5Mm T0 0,07Mm Deep, To Get A Slick Surface Without Pixel Spikes And Nice Sharp Corners On Walls, I Want To Coat The Vat With Ptfe Instead Of Pdms. It Will Enable Us To Print Microfluidic Chips Directly (Or Better Molds).

Statistics

Category

Tags