326x326mm bed support for J-Bot Core-XY?
Description
I Can'T Support A 326X326Mm Bed With The Existing Models Because I Don'T Have Enough Space For The Holes In The Corners. You Would Need Both These Mirrored Things For The Corner Holes. I Use The Jonnaylin Support For The 3Rd Hole, But For A 4-Hole Bed You Would Need 2 Pairs Of These Ones. The Design Is Meant For Use With Springs With A 10Mm Diameter And Spacers Like On Http://Www.Thingiverse.Com/Make:323057 I Did Some Countersinking Because I Like Washers To Spread The Burden. The Space-Problem Would Not Exist With The D-Bot, I Suppose, Although... This 6Mm Plate Alone Weighs Some 1.7Kg. I Am Still Busy Building The Frame, So I'M Not Sure, But I Don'T See Any Other Problems Rising From The Size Of This Plate. Edit: To Decrease The Chance Of Bottoming Out Of Hammerhead Nuts I Made Some Room Around The 5Mm Holes At The Profile Side => V2. Thanks To Kdan.
Statistics
Likes
8
Downloads
0