Raspberry Pi Zero 1.2 Acrylcase (2mm)

Description

Protect Your Raspberry Pi Zero 1.2 With This (2Mm) Acrylcase! (Note: This Is Basiclly My Rpi Zero 1.3 Acrylcase (2Mm) But Edited For The Rpi 1.2) I Designed This Case Completly From Scratch And It Fits Just Perfect On My Rpi Zero 1.2. Even A Pimoroni Blinkt! Module Fits Perfectly On Top Of The Gpio Pins. The Little Rectangles On The Middle Plate Might Be Not Necessary But They Could Avoid A Brownout Of Some Parts On The Rpi Zero Pcb. In Case You Mount A Heatsink Onto The Cpu, It Should Have Following Dimensions: 13Mm X 12Mm X 5Mm. Mine Reaches A Temperature Of About 47°C While Running. Don`T Worry About The Mini-Hdmi And Micro-Usb Ports! I Tryed Out The Fattest Plugs And Adapters And I Had No Problems Plugging Them In. !The Cad-Files Are Made For Lasercutters! I Did Use A Gcc Spirit Gx (60W Co²-Tube). What You Will Need: 2Mm Acrylicglass (At Least 105Mm X 72Mm) 4X M2,5X12 Bolts 4X M2,5 Nuts 24X M2,5 Washers

Statistics

Category

Tags