Funnel Customizer

Description

<H3>This Is A Customizer To Generate Funnels Parametrically.</H3> Version 8.6 Available. Now The Funnels Can Have An Offset And/Or Angled Spout For Hard To Reach Filling Jobs. Although It Is A Remix (Thanks Salvador Richter), It Expands The Original Project Substantially. Customize The Funnel With The Following Parameters: ***Size And Shape*** - **Diameters**: External Diameters At Three Locations (Top, Middle, Bottom); - Overall **Height**; - **Wall** Thickness; - **Neck Ratio**: The Higher The Parameter The Longer The "Neck" Of The Funnel. At 1, The Neck Is One Half The Overall Length, At 3 The Neck Is 5/6 Of The Overall Length; - **Squish Ratio**: Sometimes You Need Funnel With A "Squished" Elliptical Section. (If >1, The "Diameters" Are The Major Axes Of The Ellipse); - **Offset Spout**: Moves The Spout From The Center To The Edge Of The Funnel. - **Angled Spout**: Angles The Spout Away From The Handle For Hard To Reach Filling Holes (Automatically Creates An Offset Spout); ***Optional Features*** - **Handle Length**: Generates A Handle If This Parameter Is Not Zero, The Larger The Parameter, The Longer The Vertical Portion Of The Handle; - **Handle Overhang**: If A Handle Is Generated, The Larger The Overhang, The Longer The Horizontal Portion Of The Handle; - **Handle Angular Position**: Useful For Offset Spouts, Choose If You Want The Handle Opposite The Spout, On The Spout Side, Or On Either Side Of The Funnel. - **Add Vent**: Generates Supports That Allows Air To Escape Around The Neck; - **Vent Projection**: Make The Vent Ribs More Or Less Prominent. - **High Wall**: If Selected, The Well Of The Funnel Has A Steep Cylindrical Section Before Narrowing; - **Slanted Tip**: Cuts The Tip At A 35Degree Angle.

Statistics

Category

Tags