AIO FPV Camera Mount for Parrot Rolling Spider Frame
Description
<H1>Camera Holder / Mount For Parrot Rolling Spider Frame.</H1> ~~**Disclaimer: I Have No Printer To Test The Design Myself, So I Can'T Promise About Fit And Function. If You Print This And Find Design Issues, Please Feel Free To Tell Me.**~~ **Update: 23 Apr 2017 - I'Ve Been Using The Latest Verison For A While, And Seems There'S No One Complaining, I'M Removing "Work In Progress" Status. Any Suggestions Or Ideas Of Improvement Are Still Appreciated.** **Update: 7 Mar 2017 - Earlier Design Keep Breaking At Side Wiring Slots, I Removed Them To Improve Durability, Instead Opened Lower Corners From The Rear To Allow Easier Access To Flight Controller / Battery.** **Update: 7 Dec 2016 - A Friend Printed Test Pieces Of Both Versions, Due To Messed Up Print Settings I Had To Drill Out The 3 Holes To 1.8Mm To Fit The 3 Posts On Rolling Spider Frame. Also Further Enlarged Foot Print To 20.5X10.5Mm** ~~Update: 13 Nov 2016 - Updated Dimensions For Loose Fit, Allowing Footprint Up To 19.5X9.5Mm.~~ **Designed For Use With Fx798T Or Similar Sized Camera.** Most Decased Aio Fpv Camera Should Fit With Room For Sticky Foam Tape, As Long As Total Footprint Is Within ~~19X8.5~~ ~~19.5X9.5~~ 20.5X10.5Mm. Slots And Holes To Allow Access For Wiring And Switches On Some Camera Models. Distance Between Base Of Camera And Roof Of Frame Is Approx. 18Mm In 15 Degree Version. **Note: I Believe Cameras With Stiff Cloverleaf Antenna Will Have Fitting Issues, E.G. Hitting Antenna When Larger Props Are Used. Recommended Modding With Whip Antenna.** You May Want To Put A Small Dab Of Hot Glue Between Mount & Frame For Secure Installation While Still Removable. Design Includes 15 / ~~20~~ / 22.5 Degree Versions, I Screwed Up A Little Bit So 22.5 Degree Is Max Tilt Angle In Current Design. ~~A 15 Degree Version With Some Sort Of Roll Cage For Poops And Giggles, Or When You Really Need The Extra Protection.~~
Statistics
Likes
22
Downloads
0